I think the original responder assumed that you had a second router that you
could use.
Theoretically, the only way to upgrade a single router like this would be by
removing the existing flash memory SIMM and replacing it with another flash
memory SIMM that had the IOS version you need. Perhaps a friend may help?
At the least, you'll need a second router (and connect them back-to-back
with the serial ports) or a token ring hub / token ring NIC in your
workstation.
Paul Lalonde
""ietobe"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> How to do it?
>
> Tks
>
> ietobe
> CCNP CCDP
> ""Jason"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Have you consider using the serial port ? ;-)
> >
> > ""ietobe"" wrote in message
> > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > > Hi,
> > > does anybody know how to upgrade ios version on 2502, as you know
I
> do
> > > not have a token ring card on my pc or any other rouer. The router
does
> > not
> > > provide copy xmodem: flash: command and does not have xmodem command
> under
> > > rom ios. How do I upgrade ios software from console port?
> > >
> > > TKS
> > >
> > > ietobe
> > > CCNP CCDP
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=18457&t=18449
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
