you might find that the MAU only runs at 4 Meg, set your ringspeed to 4.
Jason
> -----Original Message-----
> From: anyong [SMTP:[EMAIL PROTECTED]]
> Sent: Wednesday, 5 September 2001 2:16 pm
> To: [EMAIL PROTECTED]
> Subject: Token ring interface does not up. [7:18549]
>
> Hi Group,
>
> I recently got a 8228 MAU for testing, I've 2502 and 4500 with token ring
> interface.
>
> Both router configured ring speed 16, no shut.
> Two 6339098 cable attached to the MAU and the router.
> The MAU start "click" + "tick".
> But the status shown on the screen is
> TokenRing0 is initializing, line protocol is down.
> And never ending like this. I've tried to clear the interface.What is the
> problem?,
> Any input please ? Thanks.
>
> anyong
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=18552&t=18549
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]