You can set up statics with a subnet mask on inside & outside ip ranges. I
had problems getting it to work when the subnet included the inside
interface, but other than that it works great.
Allen
----- Original Message -----
From: "Michael Jia"
To:
Sent: Tuesday, September 04, 2001 11:08 PM
Subject: Re: PIX - NAT 0 problems this weekend [7:18471]
> Hi,
>
> Very insightful discussion!
>
> Does 6.0's NAT 0 0 0 functions better?
>
> The benefit of NAT 0 is simple. You use one command to turn off
translation.
> Using static(), you have to enter a CLI for every subnet.
>
> if there something like static(inside, outside) 0 0 0?
> Anybody tried it?
>
> Michael
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=18682&t=18471
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
