I've notice3d that the following configs don't have the SPIDs configured,
only the switchtype. Don't you have to have SPID #1 and #2 under the BRI 0
int?
http://www.cisco.com/warp/customer/793/access_dial/isdnbridge.html
""cisco skin"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Is it possible if I have 2 ISDN routers (one at corporate and one at
remote
> site) to bridge and use both B (ppp multilink) channels?
>
> Thanks,
> Jeff
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=18835&t=18829
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
