isdn switch-type basic-5ess
With At&T ISDN switch no SPID is required.
> -----Original Message-----
> From: cisco skin [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, September 06, 2001 12:53 PM
> To: [EMAIL PROTECTED]
> Subject: Re: ISDN Bridging [7:18829]
>
>
> I've notice3d that the following configs don't have the SPIDs
> configured,
> only the switchtype. Don't you have to have SPID #1 and #2
> under the BRI 0
> int?
>
> http://www.cisco.com/warp/customer/793/access_dial/isdnbridge.html
>
>
> ""cisco skin"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Is it possible if I have 2 ISDN routers (one at corporate and one at
> remote
> > site) to bridge and use both B (ppp multilink) channels?
> >
> > Thanks,
> > Jeff
> Report misconduct
> and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=18845&t=18829
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
