That's exactly what I need to do on my 2514 router. One question I had
on your config: your default route is pointing to a 10 address. Now is
this the address of your cable modem provider's (next hop) or what?
Please could you explain. The name servers seem to be pointing to that of
your provider. Would also adding the dhcp server of the provider hurt?
I am trying the config as soon as I send this email. Will let you know.
>From: "Bob Lepine" >Reply-To: "Bob Lepine" >To: [EMAIL PROTECTED]
>Subject: Easyip & cable modem [7:19187] >Date: Sun, 9 Sep 2001 13:39:04
-0400 > >Woohoo. I got it working. I have my 2600 hooked up to my cable
modem of >which I am a DHCP client. Thanks to the group for helping me
figure this one >out! (Especially Tony Medieros and Leigh Anne Chisholm)
I have now hooked >the router up to my 2900 switch and have access to the
net with all my >computer. This will greatly enhance my studies. I am
listing the >configuration for those who need to do the same. >Names have
been altered to protect the innocent! >Current configuration : 997 bytes
>! >version 12.1 >no service single-slot-reload-enable >service
timestamps debug uptime >service timestamps log uptime >service
password-encryption >! >hostname BobRouter >! >logging rate-limit console
10 except errors >enable password 7 045907031F23404B13 >! >ip subnet-zero
>! >! >no ip finger >ip host laptop 192.168.0.3 >ip name-server
24.229.12.230 >ip name-server 204.186.0.201 >ip name-server 204.186.0.203
>! >! >! >! >interface Ethernet0/0 > ip address dhcp > ip nat outside >
half-duplex >! >interface Serial0/0 > no ip address > shutdown >!
>interface BRI0/0 > no ip address > shutdown >! >interface Ethernet0/1 >
ip address 192.168.0.6 255.255.255.0 > ip nat inside > half-duplex >! >ip
default-gateway 10.227.49.1 >ip nat inside source list 10 interface
Ethernet0/0 overload >ip classless >ip route 0.0.0.0 0.0.0.0 10.227.49.1
>no ip http server >! >access-list 10 permit 192.168.0.0 0.0.255.255 >no
cdp run >! >line con 0 > transport input none >line aux 0 >line vty 0 4 >
password 7 05090A0A314E420C03 > login >! >no scheduler allocate >end >
misconduct and Nondisclosure violations to [EMAIL PROTECTED]
------------------------------------------------------------------------
Get your FREE download of MSN Explorer at http://explorer.msn.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=19213&t=19187
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
