@home uses private address in it's network a lot. Usually the access links
are public though. That gateway is the address that his provider gave him I
think.
Tony
----- Original Message -----
From: "Cisco Nuts"
To:
Sent: Sunday, September 09, 2001 7:34 PM
Subject: Re: Easyip & cable modem [7:19187]
> Hi,
>
> I am still not sure as to what the 10 address that the default route is
> pointing to in the config comes from....I would assume that it would be
> the next hop which would be the gateway address that a dhcp client(Win2k
> pc) would get if it were in place of the 2600. Is this true? Please help.
> I would like to try to config on my 2514. I have waited so long to hear
> something like this work. And its wonderful that it actually works!!
> Presently, I am using a Win2K Prof. box with 3 NIC cards and getting to
> my inside network from work but the performance is not very good. I hope
> this new config would help. Any ideas? Thank you very much.
>
> Kind regards.
>
> >From: "Tony Medeiros" >Reply-To: "Tony Medeiros" >To:
> [EMAIL PROTECTED] >Subject: Re: Easyip & cable modem [7:19187] >Date:
> Sun, 9 Sep 2001 18:13:14 -0400 > >Now you need to setup a fat access-list
> or CBAC for some security from all >the idiots on your cable subnet. You
> wouldn't believe the probes I get >every day!! This will be a little
> challanging for you cus of your dynamic >address. Of course, since your
> router will be up all the time, chances are >you will keep renewing the
> same IP. Let me know if you need some help on >that. Better do it soon
> cus NAT won't protect you much, and you definitely >need protecting. I
> run IDS on my router and log all the probes and @!#$ >heads spoffing
> internal address and stuff. And believe me, that log gets >pretty large
> especially when school is out !! > >Take care >Tony > >----- Original
> Message ----- >From: "Bob Lepine" >To: >Sent: Sunday, September 09, 2001
> 10:39 AM >Subject: Easyip & cable modem [7:19187] > > > > Woohoo. I got
> it working. I have my 2600 hooked up to my cable modem of > > which I am
> a DHCP client. Thanks to the group for helping me figure this >one > >
> out! (Especially Tony Medieros and Leigh Anne Chisholm) I have now hooked
> > > the router up to my 2900 switch and have access to the net with all
> my > > computer. This will greatly enhance my studies. I am listing the >
> > configuration for those who need to do the same. > > Names have been
> altered to protect the innocent! > > Current configuration : 997 bytes >
> > ! > > version 12.1 > > no service single-slot-reload-enable > > service
> timestamps debug uptime > > service timestamps log uptime > > service
> password-encryption > > ! > > hostname BobRouter > > ! > > logging
> rate-limit console 10 except errors > > enable password 7
> 045907031F23404B13 > > ! > > ip subnet-zero > > ! > > ! > > no ip finger
> > > ip host laptop 192.168.0.3 > > ip name-server 24.229.12.230 > > ip
> name-server 204.186.0.201 > > ip name-server 204.186.0.203 > > ! > > ! >
> > ! > > ! > > interface Ethernet0/0 > > ip address dhcp > > ip nat
> outside > > half-duplex > > ! > > interface Serial0/0 > > no ip address >
> > shutdown > > ! > > interface BRI0/0 > > no ip address > > shutdown > >
> ! > > interface Ethernet0/1 > > ip address 192.168.0.6 255.255.255.0 > >
> ip nat inside > > half-duplex > > ! > > ip default-gateway 10.227.49.1 >
> > ip nat inside source list 10 interface Ethernet0/0 overload > > ip
> classless > > ip route 0.0.0.0 0.0.0.0 10.227.49.1 > > no ip http server
> > > ! > > access-list 10 permit 192.168.0.0 0.0.255.255 > > no cdp run >
> > ! > > line con 0 > > transport input none > > line aux 0 > > line vty 0
> 4 > > password 7 05090A0A314E420C03 > > login > > ! > > no scheduler
> allocate > > end > > > > -- > > Bob Lepine > > MCSE,MCDBA,CNA,CCNA,MCT >
> misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> ------------------------------------------------------------------------
>
> Get your FREE download of MSN Explorer at http://explorer.msn.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=19219&t=19187
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
