I believe the 2500 series runs at least partly from flash (as opposed to
routers that move their entire IOS from flash into RAM and run it from RAM),
so you should NOT be able to run a 2500 series router without any flash.
Thomas Larus, CCNP, MCSE
""Scott Lokey"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi,
> I have 3 2500's that have 16meg RAM but no Flash memory. I had read where
> you could boot to ROMMON> and issue an XMODEM command and have the IOS
> transfered to the box. There is also a option to load it into RAM and run
it
> (-r I think).
>
> Sounded good but when I boot to ROMMON, the xmodem command is not there. I
> have the latest boot ROM from Cisco on these as well. What gives?
> Documentation wrong? Am I doing something wrong? Is this even possible?
>
> Thanks for the help,
> Scott
>
>
>
>
>
> _______________________________________________________
> Send a cool gift with your E-Card
> http://www.bluemountain.com/giftcenter/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20023&t=14375
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
