Yes, it can be done. 2500 can be made to run from RAM. Use a boot System
command .
""Thomas Larus"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I believe the 2500 series runs at least partly from flash (as opposed to
> routers that move their entire IOS from flash into RAM and run it from
RAM),
> so you should NOT be able to run a 2500 series router without any flash.
>
> Thomas Larus, CCNP, MCSE
> ""Scott Lokey"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Hi,
> > I have 3 2500's that have 16meg RAM but no Flash memory. I had read
where
> > you could boot to ROMMON> and issue an XMODEM command and have the IOS
> > transfered to the box. There is also a option to load it into RAM and
run
> it
> > (-r I think).
> >
> > Sounded good but when I boot to ROMMON, the xmodem command is not there.
I
> > have the latest boot ROM from Cisco on these as well. What gives?
> > Documentation wrong? Am I doing something wrong? Is this even possible?
> >
> > Thanks for the help,
> > Scott
> >
> >
> >
> >
> >
> > _______________________________________________________
> > Send a cool gift with your E-Card
> > http://www.bluemountain.com/giftcenter/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20030&t=14375
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
