I'm working with a network that requires redundancy but also performance.
We have 2 6509s with HSRP and Gigabit Etherchannel as shown in this article
http://www.cisco.com/warp/public/473/23.html Currently servers are attached
to each switch with the Intel dual NIC that allows for fail-over mode (each
server has a NIC attached to each 6509). This does not utilized the
bandwidth since the second port is only active when the first fails. Is
there a way to configure Fast Etherchannel over the 2 6509s? I can find no
reference for this. The only obvious way is to connect the server to one or
the other 6509 and enable Fast Etherchannel. Any thoughts???
Thanks in advance for your help.
Larry Metzger
CCIE to be
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20195&t=20195
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
