No, that's if I understand you correctly in that your trying to
channel 2 fastethernets, one from switch A and the other from switch B,
or cross-switch channel.
Dave
Larry Metzger wrote:
>
> I'm working with a network that requires redundancy but also performance.
> We have 2 6509s with HSRP and Gigabit Etherchannel as shown in this article
> http://www.cisco.com/warp/public/473/23.html Currently servers are
attached
> to each switch with the Intel dual NIC that allows for fail-over mode (each
> server has a NIC attached to each 6509). This does not utilized the
> bandwidth since the second port is only active when the first fails. Is
> there a way to configure Fast Etherchannel over the 2 6509s? I can find no
> reference for this. The only obvious way is to connect the server to one
or
> the other 6509 and enable Fast Etherchannel. Any thoughts???
>
> Thanks in advance for your help.
>
> Larry Metzger
> CCIE to be
--
David Madland
Sr. Network Engineer
CCIE# 2016
Qwest Communications Int. Inc.
[EMAIL PROTECTED]
612-664-3367
"Emotion should reflect reason not guide it"
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20205&t=20195
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]