I have R6 connected to R5 via an ethernet and a ISDN link. The ISDN link is
configured as an OSPF demand circuit however when I do a show ip ospf int I
get the following output. Notice that it says "DoNotAge LSA not allowed
(Number of DCbitless LSA is 10)". Why is this, I need for the DoNotAge LSA
to be allowed and I thought this is what ospf demand-circuit is for. BTW
this is CCbootcamp lab 8a. Please help?
R6#sho ip ospf int bri0
BRI0 is up, line protocol is up (spoofing)
Internet Address 137.20.224.6/20, Area 0
Process ID 64, Router ID 137.20.60.1, Network Type POINT_TO_POINT, Cost:
1562
Configured as demand circuit.
Run as demand circuit.
DoNotAge LSA not allowed (Number of DCbitless LSA is 10).
Transmit Delay is 1 sec, State POINT_TO_POINT,
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:06
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with neighbor 137.20.240.1 (Hello suppressed)
Suppress hello for 1 neighbor(s)
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20228&t=20228
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
