John, I've done that with 2500, 2600 and 3640, and it works. Sasa John Neiberger wrote: > > Oddly, I've never run across this before and I'll have the chance to > check it out for certain tomorrow. However, I wanted to see what your > experience was with this. > > I'm going to be removing the flash from one 2600 and putting it into > another. Will this be destructive to the contents? Will I be able to > boot up the new 2600 with no problem or should I expect to load a new > image before booting? > > Since this is a production box I'll be prepared to do whichever, but it > would save me some time and stress if I could limit the downtime. > > Have any of you had any luck with this? > > Thanks, > John Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=20229&t=20229 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
