Raina,
If I'm not mistaken HSRP deals specifically will layer 2/3
redundancy and technically has nothing to do with routing. Since the
routers involved will of course have to be a part of a routing domain(ospf ,
eigrp, mixed).
You should look at RFC 2281, for the specifics...
http://www.ietf.org/rfc.html
Ask yourself the this well known Howard-ism...after reading the RFC.
"What is the problem you're trying to solve..?"
HTH
Nigel
From: "Tribavan Raina"
To:
Sent: Tuesday, September 18, 2001 9:57 PM
Subject: how does HSRP integrate with OSPF [7:20343]
> Hi all..
>
>
> I have 2 routers and I am running HSRP on them.The third router is
connected
> via a switch through its e0/0 and running OSPF.All the routers are running
> OSPF.
> What routing tables will the exchange.
>
> Regds
>
> Tribavan Raina
> Network Consultant
>
> TechTonics Group Limited
> Level 31 Grand Plimmer Tower
> 2-6 Gilmer Terrace
> PO Box 11 199
> Wellington
>
> Ph: +64 4 385 2628
> Fax: +64 4 385 2400
>
> www.techtonics.co.nz
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20357&t=20343
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
