Depends on what kind of networking product you have in your network.
If you have all cisco, go with CiscoWork2000,
If not HPOV,,..
Now cisoc has new module call DFM ,,(device fault manager) where you can
monitor all your devices and get page if it fails-- which is what HPOV was
used for most of the time.
Jin Jung...
CCNP, CCDP, CCIE written pass, MCSE, CNE
----- Original Message -----
From: "Brian Whalen"
To:
Sent: Wednesday, September 19, 2001 5:52 PM
Subject: Re: HP OpenView, CiscoWorks, Cabletron [7:20406]
> This probably depends greatly on what you'd like to do with it.
>
> Brian "Sonic" Whalen
> Success = Preparation + Opportunity
>
>
> On Wed, 19 Sep 2001, Mr. Monitor wrote:
>
> > Dears......
> >
> > Who know which one is the best ?
> > Which one is the best tools?
> >
> > Thank you very much!
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20595&t=20406
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
