I have no problem with PIX to 3000 client 3 client.
You have to create tunnel on PIX, not on client. Are
you using sample config from TAC center? If so, you
have to add one more access-list to create the tunnel,
they forget to put it there...
HTH.
Jim
--- Kevin McIntyre
wrote:
> I am attempting to set up our PIX 506 to allow 3DES
> IPSEC VPNs to be
> created over the internet from a client dialed to
> local ISP.
>
> I have tried many clients but am having a horrible
> time with Cisco's
> 3000 version 3 client. (some workstations will be
> Win2k therefore
> ruling out the secure client). When I bring the
> tunnel up I have no
> routes to enable the workstation to use the tunnel?
>
> Am I doing something wrong, using wrong client
> etc???
>
> Kevin
[EMAIL PROTECTED]
__________________________________________________
Terrorist Attacks on U.S. - How can you help?
Donate cash, emergency relief information
http://dailynews.yahoo.com/fc/US/Emergency_Information/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20618&t=20593
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
