Hi Jeff,
Thanks for the reply...
I will try to simplify this ...
X---172.21.0.0-------{172.21.1.55}------------ 4 /1-12 trunked
ports------*FDDI trunk
4/1,2*
(network) | |
(cat6509) |
|
|
|-----------{172.21.1.100}
|
|--------|
PBX Server
X----------{172.21.1.5} |-------{172.21.1.248}---X
PBX Host
Now devices 1.5 & 1.248 currently communicate via the cat 6509 ok.
once the 1.5 host was moved to the trunked ports 4/ 3 ...it still recieved
packets form
the 1.55, but could not reach host 1.248
What i need to achieve here is....
allow Hosts 1.100 & 1.5 to communicate via the fiber trunk because of the
"Chatter",
and Host 1.5 to communicate to host 1.248 via the trunked port.
Jeff Smith wrote:
> Mark, not sure what you mean by putting a pc on a trunk link. Were the two
> boxes plugged into the same switch at one time and now they are plugged
into
> two joined by a trunk? If so, make sure the config for the two trunked
> ports is consistent.
>
> >From: "Mark Kinley"
> >Reply-To: "Mark Kinley"
> >To: [EMAIL PROTECTED]
> >Subject: Fiber Trunking.....question? [7:20596]
> >Date: Thu, 20 Sep 2001 15:59:26 -0400
> >
> >Hello All you cisco mentors out there....
> >I have a question regarding a particular device on an existing network
> >that i cannot connect to after i have set up the trunk.
> >
> >The device is address 172.21.1.248 ..a reporting system.
> >
> >I have a p.c on the same network that currently connects to this unit
> >daily.
> >I have loaded some PBX software onto this p.c. that is extremely
> >"Chatty".
> >I have been advised to put this device onto this trunked vlan in order
> >to "share the load " so to speak.
> >I wanna know if anyone has a solution as to how this p.c can still
> >communicate to this .248 device after i put it on the trunk?
> >isn't there a database of MAC addesss that get's created ?
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20676&t=20596
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
