If you skip the Frame Relay encapsulation and use HDLC instead, all you got
to do is provide the clock at the one acting as DCE:
router-dce(config-if)#clock rate 64000
If you want to simulate a Frame Relay, you will need a third switch. One to
act as a Frame Relay switch, and two to connect to the first one, creating a
PVC between them.
Hth,
Ole
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Ole Drews Jensen
Systems Network Manager
CCNA, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://www.RouterChief.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NEED A JOB ???
http://www.oledrews.com/job
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----Original Message-----
From: Nick Christofi [mailto:[EMAIL PROTECTED]]
Sent: Friday, September 21, 2001 1:39 PM
To: [EMAIL PROTECTED]
Subject: DCE/DTE serial null cable [7:20715]
Hey everybody,
Have 2 2524's running in my lab, with the 60 pin
DTE/DTE cable connecting the 2 serial ports, no
DSU/CSU. How do I config one as the DTE and one as
the DCE, with IOS 11.1, running frame-relay
is the command: frame-relay intf-type dce
enough?
I get a lot of interface resets/carrier transitions
take a look:
Encapsulation FRAME-RELAY, loopback not set, keepalive
set (10 sec)
LMI enq sent 0, LMI stat recvd 0, LMI upd recvd 0
LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0,
DCE LMI down
LMI DLCI 1023 LMI type is CISCO frame relay DCE
Broadcast queue 0/64, broadcasts sent/dropped 0/0,
interface broadcasts 0
Last input never, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0 (size/max/drops); Total output
drops: 0
Queueing strategy: weighted fair
Output queue: 0/64/0 (size/threshold/drops)
Conversations 0/1 (active/max active)
Reserved Conversations 0/0 (allocated/max
allocated)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0
ignored, 0 abort
2 packets output, 291 bytes, 0 underruns
0 output errors, 0 collisions, 42 interface
resets
0 output buffer failures, 0 output buffers
swapped out
86 carrier transitions
DCD=up DSR=up DTR=up RTS=up CTS=up
thanks
Nick
__________________________________________________
Terrorist Attacks on U.S. - How can you help?
Donate cash, emergency relief information
http://dailynews.yahoo.com/fc/US/Emergency_Information/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20717&t=20715
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
