Sounds like a Sun Quad card. You'll need to go to the Sun webpage and look
at the instructions, there is a command to enable a MAC address for each
port.
David C Prall [EMAIL PROTECTED] http://dcp.dcptech.com
----- Original Message -----
From: "king kaung"
To:
Sent: Saturday, September 22, 2001 12:09 PM
Subject: assign quad ports nic on cat 4006 switch [7:20777]
> Hi,
>
> I have the problem connecting quad ports(4 network ports with only one MAC
> address)NIC on cisco cat 4006 switch. Cat 4006 refuse to recognize the two
> network connection with same MAC address and it shows error state that"
> flapping occurs between ...port and ... port. So I cannot connect my
> firewall machine to Cat 4006 switch. Last time it works well with legacy
> 3Com switch. Pls advice me this difficulty.
>
> Regards,
> Moe.
>
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20799&t=20777
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
