Moe,
Set all of the switchports that the McIntosh clients are attached to to
begin forwarding immediately.
See this document on CCO.
http://www.cisco.com/warp/public/473/12.html
Hope this helps
Christopher Supino
CCNP, CCDP, MCSE, CNA, ASE
Senior Network Design Engineer
TransNet Corp.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
king kaung
Sent: Sunday, September 23, 2001 7:02 AM
To: [EMAIL PROTECTED]
Subject: apple machine and cisco switch problem [7:20825]
Hi All,
I have big problem with our apple machines. Last week, I replaced my old
3Com switches to cisco 3524 switches. Then most of my apple machine can not
see each other(cannot access appleshare)but it can see and can access PC
Servers. I try to configure the speed and duplex according apple's NIC
specification on individual ports. But some of the apple machine still
cannot see. I put those Mac machines back to 3Com switch and it works again.
We don't have zone setting on apple machines.The protocols are all
default.Our network is flat network and no subnet, no VLAN.
Anything I miss out to configure on my Cisco switches? Or any special
setting for apple machines I need to set?
Many thanks,
Moe.
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20832&t=20825
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
