I have been working with a number of differnt OSPF configurations (CCBootcamp labs 1&2) and it seems that I always run into a situation where my routers have the entire OSPF database but the routes do not get injected into the routing table. After a series of shutting interfaces and a couple of router reboots they will then appear.... Note: This is strictly OSPF, no redistribution.... Question: What is the process for extracting routes from the OSPF database and placing the routes in the routing table ? I have read through the Cisco design guide but still cant seem to pull it together.... Any help would be appreciated.. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21000&t=21000 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]