I think if you do clear ip ospf * that should empty the routing table
repopulate it from the ospf database...
""routerkid"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I have been working with a number of differnt OSPF configurations
(CCBootcamp
> labs 1&2) and it seems that I always run into a situation where my
routers
> have the entire OSPF database but the routes do not get injected into the
> routing table. After a series of shutting interfaces and a couple of
router
> reboots they will then appear....
> Note: This is strictly OSPF, no redistribution....
>
> Question: What is the process for extracting routes from the OSPF
database
> and placing the routes in the routing table ?
>
>
> I have read through the Cisco design guide but still cant seem to pull it
> together.... Any help would be appreciated..
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=21037&t=21000
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
