Try this link for info:
http://www.cisco.com/warp/public/471/top_issues/access/top_issues_access.sht
ml
> -----Original Message-----
> From: Robert Fowler [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, September 25, 2001 8:51 PM
> To: [EMAIL PROTECTED]
> Subject: Aux port - Dialer setup question [7:21088]
>
>
> While studying for my BCRAN test, I decided to test some of
> what I learned
> however I think I may have hit a bump. I think the problem is
> you can't put
> an aux port into a dialer pool because it doesn't have a
> physical interface.
> However for the purpose of this exercise I let you in on what I have
> attempted.
>
> I have 2 routers, I have a modem connected to each aux port.
> The 2 routers
> have a link between them, if that link goes down I want 1
> router to call the
> 2nd and establish a connection using the aux ports.
>
> Do I have to have an asynch port in order to accomplish this?
>
>
> Thank You,
> Robert Fowler
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=21091&t=21088
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
