Michael,
You need to configure your PRI interface and I believe create one to many
channel-groups on that interface as needed; One for every pair of lines that
will run to your remote sites, so say 13 channel-groups.
Hope this helps,
Tim Booth
----- Original Message -----
From: "michael"
To:
Sent: Wednesday, September 26, 2001 8:54 AM
Subject: PRI to BRI BACKUP [7:21136]
> Dear all,
>
> could somone help me with my following question how to configure
> ISDN PRI to BRI ?
>
> I would like to configure the following szenario:
>
> 1 central site : 1x PRI
> 13 remote site: 1x BRI
>
> If our frame goes down or one of the PVC to the remote site i would like
to
> activate ISDN Backup with 128kb from the centrale site to the remote side
> and the other way arround.
> But how it is possible to configure the central site using 128kb (2
> timeslots) for calling the remote site ? I have got 30B Channels (30
> timeslots) on the central side.
>
> Please help me
>
> best regards
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=21150&t=21136
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
