u need policy routing send yr config -----Original Message----- From: Chamak [mailto:[EMAIL PROTECTED]] Sent: Wednesday, October 03, 2001 4:03 PM To: [EMAIL PROTECTED] Subject: Re: source based routing ..... [7:21827]
Set the default gateway on both the serial interfaces to your ISP, this should work. Mukul ""RAJESH AGNIHOTRI"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Greetings to All ... > > > I would highly appreciate if some one can help me out this problem... > > Basically we have connectivity to two ISP in India.We have different IP > address give by the different ISP. > > 1> 202.169.191.128/29 > 2>164.164.89.80/28 ... These are the lan ip address give to use by the > ISP... we have 2610 router with to serial interface and on Ethernet > interface. > > Now we wanted to configure this router in such a way that any packet comming > from 164.164.89.80/28 should be routed its respective ISP > and any packet comming from 202.169.191.128/28 network should be routed to > respective ISP. > > we have give both the ip address on the eth.. > one of ISP 164 AND ISP 202 ..... SECONDRY .. > > can any one help us out on this > > > Line of reply is highly appreciated > > > Regards > > RajesH Agnihotri > > > _________________________________________________________________ > Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21832&t=21827 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]