In most routers a debug all will finish itself in a few seconds ;) Dave
Kim Edward B wrote: > > Dear Cisco grus, > > Is there such a debug command that sets time for the debugging so in case I > do such thing as 'debug all' it finishes the debug by itself after certain > time? > I searched the Cisco site and also am going through the 12.0 Debug Command > Reference but can't seem to find it. > Let me know. > > Ed > CCNP, CCDP, CCIE Written > > ***************************************************************** > DISCLAIMER: The information contained in this e-mail may be confidential > and is intended solely for the use of the named addressee. Access, copying > or re-use of the e-mail or any information contained therein by any other > person is not authorized. If you are not the intended recipient please > notify us immediately by returning the e-mail to the originator. -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=21905&t=21883 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]