Hey Grad, R1 and R2 need dialer maps to their own IP addresses. On each router, create a dialer map that points to the local IP address and remote phone number.
Fred >From: "Grad Alfons Kanon" >Reply-To: "Grad Alfons Kanon" >To: [EMAIL PROTECTED] >Subject: CAN NOT PING TO ITSELF ON BRI [7:22030] >Date: Thu, 4 Oct 2001 07:58:37 -0400 > >Helo all, > >I configure my router BRI on r1 with: > >interface BRI0/0 >ip address 122.5.12.1 255.255.255.252 >ip directed-broadcast >encapsulation ppp >no ip mroute-cache >dialer idle-timeout 60 >dialer map ip 122.6.12.2 name r2 broadcast 456789 >dialer load-threshold 128 outbound >dialer-group 1 >isdn switch-type basic-5ess >ppp authentication chap >ppp chap hostname rack01 >ppp chap password cisco >ppp multilink > > >and r2: > >interface BRI0/0 >ip address 122.6.12.2 255.255.255.252 >ip directed-broadcast >encapsulation ppp >dialer map ip 122.6.12.1 name rack01 broadcast >dialer-group 1 >isdn switch-type basic-5ess >no peer neighbor-route >ppp authentication chap >ppp multilink >end > > >But from r1 I can only ping to r2 BRI interface, I can't ping to r1 BRI0/0 >(itself) > >any clue, > >tx, > >Grad > >_________________________________________________________________ >Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=22077&t=22030 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]