Sorry, the ip address on bri router is 122.6.12.1 , I made an error, because I wrote it manually instead of cut and and paste, becuase this ip address is opeartional and confidential...
Grad PS. thanks any way >From: "Schneider, Matt" >To: 'Grad Alfons Kanon' >Subject: RE: CAN NOT PING TO ITSELF ON BRI [7:22030] >Date: Thu, 4 Oct 2001 08:21:20 -0400 > >change the ip address on bri1 to 12.6.12.1 > >-----Original Message----- >From: Grad Alfons Kanon [mailto:[EMAIL PROTECTED]] >Sent: Thursday, October 04, 2001 7:59 AM >To: [EMAIL PROTECTED] >Subject: CAN NOT PING TO ITSELF ON BRI [7:22030] > > >Helo all, > >I configure my router BRI on r1 with: > >interface BRI0/0 >ip address 122.5.12.1 255.255.255.252 >ip directed-broadcast >encapsulation ppp >no ip mroute-cache >dialer idle-timeout 60 >dialer map ip 122.6.12.2 name r2 broadcast 456789 >dialer load-threshold 128 outbound >dialer-group 1 >isdn switch-type basic-5ess >ppp authentication chap >ppp chap hostname rack01 >ppp chap password cisco >ppp multilink > > >and r2: > >interface BRI0/0 >ip address 122.6.12.2 255.255.255.252 >ip directed-broadcast >encapsulation ppp >dialer map ip 122.6.12.1 name rack01 broadcast >dialer-group 1 >isdn switch-type basic-5ess >no peer neighbor-route >ppp authentication chap >ppp multilink >end > > >But from r1 I can only ping to r2 BRI interface, I can't ping to r1 BRI0/0 >(itself) > >any clue, > >tx, > >Grad > >_________________________________________________________________ >Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=22170&t=22030 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]