Hello, I guess I'll try Erlend's way...That was what was specified on the Cisco web site....I added the tftp parameter as I saw it as an example command...So Leigh, help me out here, how can I fix this problem....Let me ask you this...I was doing this telnetted to a terminal server at home from my work....Do you think if I do it at home, it will work...I mean, have the routers in front of me... :-) Thank you.
>From: "Leigh Anne Chisholm" >Reply-To: "Leigh Anne Chisholm" >To: [EMAIL PROTECTED] >Subject: RE: tftp server download bombed!! [7:21975] >Date: Thu, 4 Oct 2001 14:32:54 -0400 > >Erlend, you're half right. There's two ways to boot from TFTP. Yours and >"Cisco Nuts". This is his way (and from this output, you can also see >where >you can use your method... > >RouterA(config)#boot ? > bootstrap Bootstrap image file > buffersize Specify the buffer size for netbooting a config file > host Router-specific config file > network Network-wide config file > system System image file > >RouterA(config)#boot system ? > WORD TFTP filename or URL > flash Boot from flash memory > mop Boot from a Decnet MOP server > rcp Boot from a server via rcp > rom Boot from rom > tftp Boot from a tftp server > >RouterA(config)#boot system tftp ? > WORD Configuration filename > >RouterA(config)#boot system tftp c1600-j-p.bin ? > Hostname or A.B.C.D Address from which to download the boot config file > > >RouterA(config)#boot system tftp c1600-j-p.bin 172.16.1.1 ? > > >RouterA(config)#boot system tftp c1600-j-p.bin 172.16.1.1 > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > > Erlend Ringstad > > Sent: Thursday, October 04, 2001 1:33 AM > > To: [EMAIL PROTECTED] > > Subject: Re: tftp server download bombed!! [7:21975] > > > > > > the command is: > > boot system image ip > > not boot system tftp image ip > > > > At 04:34 04.10.2001, Cisco Nuts wrote: > > >Hello, > > >Just configured a 2501 router as a tftp server with the command: > > ># tftp-server flash:c2500-ins-l.120.bin 10 > > ># access-list 10 permit 172.16.12.0 > > > > > >Can ping to the client router at 172.16.12.2 > > > > > >On the client router configed the following: > > ># no boot system > > ># boot system tftp c2500-ins-l.120.bin 172.16.12.1 > > ># boot system rom > > ># config-register 0x010F > > ># end > > ># wr > > ># reload > > > > > >When ther router reboots, I get the following error msg. > > >"%SYS-4-CONFIG_NEWER: Configurations from version 11.3 may not > > be correctly > > >understood. > > >Loading c2500-ins-l.120-19.bin [File not found] > > >Flash boot: File 'c2500-d-l.113-11a.bin' open failed. > > > > > >Sleeping for 2 secs before next netboot attempt > > >Loading c2500-ins-l.120-19.bin [File not found] " > > > > > >And then the router finally boots to a R1-Moritz(boot)> prompt. > > > > > >Can someone help out? Please advise. > > >Thank you. > > >Kind regards. > > > > > > > > > > > > > > >_________________________________________________________________ > > >Get your FREE download of MSN Explorer at >http://explorer.msn.com/intl.asp _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=22102&t=21975 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
