Quote from the Installation and Configuration Guide: Solid Amber:
Port is not forwarding. Port was disabled by management or an address violation or blocked by Spanning-Tree Protocol (STP). Note. After a port is reconfigured, the port status LED can remain amber for up to 30 seconds as STP checks the switch for possible loops. Hth, Ole ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Ole Drews Jensen Systems Network Manager CCNP, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ http://www.RouterChief.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ NEED A JOB ??? http://www.oledrews.com/job ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -----Original Message----- From: Rizzo, Damian [mailto:[EMAIL PROTECTED]] Sent: Thursday, October 04, 2001 4:29 PM To: [EMAIL PROTECTED] Subject: Orange lights on Catalyst 2900XL Switch [7:22109] Hey all, I have a quick question regarding a Catalyst 2900XL Switch. All appears well, all the status LED's are green with the exception of two of them. Coincidentally, those two ports are connected to the Uplink ports of two Hubs. Now both hubs work fine, all connected devices work fine, a "show int" on the switch show's both the ports with a Orange LED as UP and the Line Protocol as being up. Physically all appears to be working. It just bothers me that those two ports are Orange. I thought Orange only meant one thing, NO GOOD. Just Curious if anyone else has experienced this. Thanks for your time -Rizzo This electronic mail transmission contains confidential information intended only for the person(s) named. Any use, distribution, copying, or disclosure by any other person is strictly prohibited. If you received this transmission in error, please notify the sender by replying to e-mail and destroy message. Opinions, conclusions, and other information in this message that do not relate to the official business of MARAKON ASSOCIATES shall be understood to be neither given nor endorsed by the company. When addressed to MARAKON clients, any information contained in this e-mail is subject to the terms and conditions in the governing client contract. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=22126&t=22109 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
