Hi, the answer is NO. you don't need a MUX at your end as long as your interface is channelised E1 capable. you just need to configure the timeslots on the router.
-----Original Message----- From: Vijendra Jaiswal [mailto:[EMAIL PROTECTED]] Sent: Thursday, October 04, 2001 10:24 PM To: [EMAIL PROTECTED] Subject: To Multiplex n X 64 Kpbs ckts and terminating on the Router( [7:22049] Hello , Secnario : To Multiplex n X 64 Kpbs ckts and terminating on the outer( Channelized PRI Port) Instead of having the ckts terminated on Copper Pair the leased ckts should be terminated on a 2Mbps stream(1 stream of STM-1 OFC equippment) ) which is then connected to a channelized PRI port of 3660 router. A multiplexer is being placed at the TELCO to multiplex the n X64 Kbps ckts Here is my question now :--- After placing the multiplexer at the TELCO , do i have to place another multiplexer at my end too ? Or i can directly terminate the o/p of the multiplexer, coming on the 2Mbps stream , to the channelized port of the 3660 Router ? Pls let me know abt the same. Thanks Vijendra. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=22161&t=22161 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
