If your PVC is less than 256k, see about getting a second PVC just for the
Voice and run Map-Classes.  This will help tremendously.

Good luck, and have fun!

Have a great weekend too.
- Mark

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Thomas
Sent: Friday, October 19, 2001 1:30 PM
To: [EMAIL PROTECTED]
Subject: Re: Gateway for VoIP [7:23219]


In my case, the frame circuit are already in place.  It's just a matter of
getting the most out of that frame relay link, like VoIP, H323 traffic for
instant to save long distant call or video conferencing...  Again, Thanks!


""Mark Odette II""  wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> OK, here's one more tip then...
> If the Overseas office is there, and the HQ is here or in some other
> geographically separate region, you probably will be best set up with a FR
> connection b/t the two sites.  Anything else will probably be cost
> prohibitive, or will put too many hops in the picture to meet the latency
> requirements for voice.
>
> Good luck,
> Mark Odette II
> StellarConnection Services
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Thomas
> Sent: Thursday, October 18, 2001 8:25 PM
> To: [EMAIL PROTECTED]
> Subject: Re: Gateway for VoIP [7:23219]
>
>
> Thanks Mark!  Your side notes actually answer my question.  There's no
doubt
> about having PBX at medium or large sites, and therefore a need for a
T1/E1
> channalized gateway for voice/fax between the router and the PBX.  I am
just
> concerning if I could do the scenario you just described for  a small
> oversea office of 4 or 5 sale people, where they don't have a PBX, but
still
> able to use the IP phones to talk to HQ using the WAN (VoIP) and still
able
> to talk to a regular analog phone with the FXO gateway attached to the
> router.
>
> Thomas N.
>
>
> ""Mark Odette II""  wrote in message
> news:[EMAIL PROTECTED]...
> > Thomas- You say that the site "Does NOT" have a PBX.  If this means that
> > they(users) all have Analog phones, and you want to  give them the
ability
> > of IP phones, what exactly do you mean??
> >
> > Please define your problem more clearly so that you might have a few
> > suggested solutions thrown out.
> >
> > Just as a side note- If you have a 2600 Series router, and you want to
put
> > voice on it (VoIP, VoFR, VoATM) for the purpose of having no more than 4
> > people simultaneously calling 1 remote office, it is possible to connect
4
> > analog phones directly to it (on FXS ports) and have them dial out to
the
> > remote facility over a P-to-P WAN, saving LD costs.  But this is a
rather
> > small scale, unscalable option, and they still wouldn't have PSTN access
> on
> > the same phone.  A second 2600 with 4 FXO ports would have to be added
to
> > the picture to give those 4 users access to the PSTN with a contrived
> > dial-plan on the first 2600 pointing to the router with the FXO ports.
> >
> > To service users with VoIP and access to the PSTN, you WILL have to
> acquire
> > some sort of separate Gateway/PBX/PABX.
> >
> > -Mark Odette II
> > StellarConnection Services
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> > Thomas N.
> > Sent: Tuesday, October 16, 2001 11:06 PM
> > To: [EMAIL PROTECTED]
> > Subject: Gateway for VoIP [7:23219]
> >
> >
> > Hi All,
> >
> > I have a small site that doesn't have a PBX.  This site has a Cisco 2600
> > router.  I would like to integate the phone system with IP phones.  I
> wonder
> > if there is any network module for the Cisco 2600 router that acts as a
> > gateway directly to the POTS (regular phones)?  Thanks All!
> >
> > Thomas N.




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=23555&t=23219
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to