Another question: How do I crack the pwd?? http://www.cisco.com/warp/public/474/pswdrec_6000.html stolen from there
here is another way Software and Password Recovery By Shorting Pins on the Catalyst 1200 Use this procedure if the software and password recovery procedure fails and your Catalyst 1200 does not reboot running software. This procedure is similar to accessing ROM Monitor (ROMMON) mode on a router. Essentially, this procedure provides you with enough switch functionality to re-download the software to the switch. Remove the cover of the switch. Locate pins JP17 and short them. The pins can be found to the right of all the LEDs and to the left of the RESET button. After the pins are shorted, reboot the switch. The switch will come back with the boot prompt. Once you are at the boot prompt, you can define an IP address using the ifconfig command and download NMP and DMP software. If these steps do not work, you probably need new hardware. Oz Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=24418&t=24394 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
