That's depending on the WAN side what technology you are using. If you are using Frame Relay or HDLC between the WAN side via serial link, there will be no collision. Since Frame Relay and HDLC are connection-oriented but not reliable. All the re-transmission are done by between 2 hosts of each opposite end. In case of using X.25, there will be a collision since X.25 is connection-oriented and reliable. 2 routers between the serial line will do all the re-transmission. So there will be a collision. HTH Albert
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Dave Luancing Sent: Monday, October 29, 2001 10:03 PM To: [EMAIL PROTECTED] Subject: Collisions on a Serial Line [7:24601] Is it possible to have collisions on a serial line ?? if so, what causes this? - D.L. __________________________________________________ Do You Yahoo!? Make a great connection at Yahoo! Personals. http://personals.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=24607&t=24601 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
