Jay, The telco can loop your CSU/DSU either internal or external. They can only loop the CSU portion of your CSU/DSU. Their is a loop up command for the CSU and another command for the NIE (for 56K/64K circuits)/NIU(for full T1's) or smart jack whichever you prefer.
-----Original Message----- From: Jay Creasy [mailto:[EMAIL PROTECTED]] Sent: Thursday, November 01, 2001 2:42 PM To: [EMAIL PROTECTED] Subject: telco looping [7:24972] When troubleshooting a typical T1 with telco and they say they have your CSU looped. Are they actually able to give the CSU inside the Cisco Router a command to be looped or are they really just looping the smart-jack/demark ? I've been on the phone with telco and seen that when they claim to have the CSU\DSU looped, what they are actually doing is looping the smart-jack/demark, which will loop all traffic from the csu back on itself. Jay _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=24991&t=24972 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]