Not only do you need the clockrate command to change the speed of the link, keep in mind that the bandwidth command is also used, not only to tell EIGRP how much bandwidth it can use (default 50%), but it's also used to compute interface statistics, etc..... like load and the like. If your goal is control the bandwidth used by EIGRP, I would suggest leaving the bandwidth statement so that it reflects the true bandwidth and then using following command:
ip bandwidth-percent eigrp Mike W. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=25083&t=25061 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
