I don't see the underline or bold, but everything looks good. Here is the Sho Ver from a loaded 2501, to compare.
2501>Sho Version Cisco Internetwork Operating System Software IOS (tm) 2500 Software (C2500-JS-L), Version 12.2(5a), RELEASE SOFTWARE (fc1) Copyright (c) 1986-2001 by cisco Systems, Inc. Compiled Fri 05-Oct-01 00:20 by pwade Image text-base: 0x03078B98, data-base: 0x00001000 ROM: System Bootstrap, Version 11.0(10c)XB2, PLATFORM SPECIFIC RELEASE SOFTWARE (fc1) BOOTLDR: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c)XB2, PLATFORM SPECIFIC RELEASE SOFTWARE (fc1) 2501 uptime is 10 hours, 30 minutes System returned to ROM by reload System image file is "flash:/c2500-js-l.122-5a.bin" cisco 2500 (68030) processor (revision L) with 14336K/2048K bytes of memory. Processor board ID 01994865, with hardware revision 00000000 Bridging software. X.25 software, Version 3.0.0. SuperLAT software (copyright 1990 by Meridian Technology Corp). TN3270 Emulation software. 1 Ethernet/IEEE 802.3 interface(s) 2 Serial network interface(s) 32K bytes of non-volatile configuration memory. 16384K bytes of processor board System flash (Read ONLY) Configuration register is 0x2102 Phil ----- Original Message ----- From: "Elijah Savage" To: Sent: Saturday, November 10, 2001 11:48 PM Subject: Help Error on Boot up [7:25754] > [ The following text is in the "iso-8859-1" character set. ] > [ Your display is set for the "US-ASCII" character set. ] > [ Some characters may be displayed incorrectly. ] > > All here is the boot up message and a sh ver. Look at the bold and > underlined portion of this message why is that showing up this is a > 2503. Before I buy 8 meg more flash for it to bump it up to 16 meg flash > I want to make sure nothing is wrong. I have a config on it now and it > seems to work fine but can't figure out why this is happening. > > System Bootstrap, Version 11.0(10c)XB2, PLATFORM SPECIFIC RELEASE > SOFTWARE > (fc1) > Copyright (c) 1986-1998 by cisco Systems > 2500 processor with 16384 Kbytes of main memory > > %SYS-4-CONFIG_NEWER: Configurations from version 11.2 may not be > correctly > under > stood. > F3: 7856500+96596+313640 at 0x3000060 > > Restricted Rights Legend > > Use, duplication, or disclosure by the Government is > subject to restrictions as set forth in subparagraph > (c) of the Commercial Computer Software - Restricted > Rights clause at FAR sec. 52.227-19 and subparagraph > (c) (1) (ii) of the Rights in Technical Data and Computer > Software clause at DFARS sec. 252.227-7013. > > cisco Systems, Inc. > 170 West Tasman Drive > San Jose, California 95134-1706 > > > > Cisco Internetwork Operating System Software > IOS (tm) 2500 Software (C2500-J-L), Version 11.2(12), RELEASE SOFTWARE > (fc1) > Copyright (c) 1986-1998 by cisco Systems, Inc. > Compiled Mon 23-Feb-98 14:53 by tlane > Image text-base: 0x0303F098, data-base: 0x00001000 > > cisco 2500 (68030) processor (revision F) with 16384K/2048K bytes of > memory. > Processor board ID 03299226, with hardware revision 00000000 > Bridging software. > SuperLAT software copyright 1990 by Meridian Technology Corp). > X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. > TN3270 Emulation software. > Basic Rate ISDN software, Version 1.0. > 1 Ethernet/IEEE 802.3 interface(s) > 2 Serial network interface(s) > 1 ISDN Basic Rate interface(s) > 32K bytes of non-volatile configuration memory. > 8192K bytes of processor board System flash (Read ONLY) > > > > Press RETURN to get started! > > > #sh ver > Cisco Internetwork Operating System Software > IOS (tm) 2500 Software (C2500-J-L), Version 11.2(12), RELEASE SOFTWARE > (fc1) > Copyright (c) 1986-1998 by cisco Systems, Inc. > Compiled Mon 23-Feb-98 14:53 by tlane > Image text-base: 0x0303F098, data-base: 0x00001000 > > ROM: System Bootstrap, Version 11.0(10c)XB2, PLATFORM SPECIFIC RELEASE > SOFTWARE > (fc1) > BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c)XB2, > PLATFORM > SPECIFIC RELEASE SOFTWARE (fc1) > > 2503BottomRack uptime is 2 minutes > System restarted by power-on > System image file is "flash:c2500-j-l.112-12.bin", booted via flash > > cisco 2500 (68030) processor (revision F) with 16384K/2048K bytes of > memory. > Processor board ID 03299226, with hardware revision 00000000 > Bridging software. > SuperLAT software copyright 1990 by Meridian Technology Corp). > X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. > TN3270 Emulation software. > Basic Rate ISDN software, Version 1.0. > 1 Ethernet/IEEE 802.3 interface(s) > 2 Serial network interface(s) > 1 ISDN Basic Rate interface(s) > 32K bytes of non-volatile configuration memory. > 8192K bytes of processor board System flash (Read ONLY) > > Configuration register is 0x2102 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=25810&t=25754 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
