Hi ,
I want to make a policy routing on one of Interfaces, and I have defined a
route-map for it:( IP addresses are changed)
!
route-map TEST permit 2
match ip address 133
set interface tunnel 0
!
access-list 133 permit ip 192.168.100.0 0.0.0.255 any
access-list 134 deny ip 192.168.100.0 0.0.0.255 any
access-list 134 prmit ip any any
!
interface fastethernet0/0.7
ip address 192.168.100.1 255.255.255.0
ip policy route-map TEST
encapsulation isl 7
!
ip route 0.0.0.0 0.0.0.0 serial 4/0
------------------------------------------
The problem is that policy routing dosn't work at all. The packets are not
routed to the tunnel interface at all, instead they are routed through the
default route (serial 4/0). First I thought the problem is with the
access-list, so I applied the 134 access-list for outbound traffic on my
sreial interfaces, THE PACKETS MATCHED THE ACCESS-LIST AND GOT DROPPED.
I don't what causes the problem, is it an IOS bug or I am doing something
wrong.
Any input would be appreciated,
Thanks
Hamid
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=26196&t=26196
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
