I've faced a similar problem in the past.... If you think that the configs are correct, try to upgrade the IOS on the 801.
My problem was solved immediately. Dvass Hans Schimek wrote: > > I am trying to implement a dial-up connection to a remote site ( > Cisco2611 dials to Cisco 801). > I am using Dialer Profiles with CHAP Authentication. > The config seems to be OK - the router is dialing - > authentication is > successful - and the line changes to UP. > except the IPCP-State - which won`t come UP.. > =20 > Thx > hans > =20 > ------------------------------------------------------------- > DI(FH) Hans Schimek > Systems Engineer=20 > NTS Netzwerk Telekom Service > Gesellschaft m.b.H & Co KG > Lemb=F6ckgasse 49/1/B > A-1230 Wien > Tel: +43 1 867 67 76 - 13 , Fax: +43 1 867 67 76 - 56 > Web: , =20 > -------------------------------------------------------------=20 > NTS Vertrieb: [EMAIL PROTECTED]=20 > NTS Support: [EMAIL PROTECTED]=20 > NTS Training: [EMAIL PROTECTED]=20 > -------------------------------------------------------------=20 > =20 > > Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=26356&t=26232 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]