BGP rides on top of TCP and BGP's default TTL is 1. Therefore to run BGP you must be directly connected, unless you implement ebgp multi-hop. Which allows you to reconfigure BGP's TTL value so that you may establish a BGP session with that neighbor that is not directly connected.
HTH, Chris Christopher A. Kane CCNP/CCDP Technical Support - Solution Center/Hilliard UUNET/WorldCom -----Original Message----- From: Ihsan Turkmen [mailto:[EMAIL PROTECTED]] Sent: Thursday, November 15, 2001 6:37 AM To: [EMAIL PROTECTED] Subject: about BGP [7:26353] Hi. I am trying to configure two routers as BGP peers . Routers (both) are on the same LAN but in diffrent subnetworks. I mean, routers can ping eachother , since there is another router between them. But , they can not establish BGP connection as two neighbours. Does that mean they have to be dirctly connected to eachother.? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=26372&t=26353 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]