Hi, Try connecting both the routers using two different hubs/switches ie., avoid connecting them through a single switch/hub, no mater if you have them on different subnets.
I had the same problem while dong my bgp lab at my ccnp days. I used a single switch but created 2 VLANs on it. It worked for me. thanks Suresh MCSE+I,CNE,CCSA,SCSA,CCSA,MCNS,CCNP,CCIE(Write) http://www.sureshhomepage.com >From: "[EMAIL PROTECTED]" >Reply-To: "[EMAIL PROTECTED]" >To: [EMAIL PROTECTED] >Subject: RE: about BGP [7:26353] >Date: Thu, 15 Nov 2001 15:44:09 -0500 > >Did you configure ebgp-multihop? > >-----Original Message----- >From: ]hsan Turkmen [mailto:[EMAIL PROTECTED]] >Sent: Thursday, November 15, 2001 1:37 PM >To: [EMAIL PROTECTED] >Subject: about BGP [7:26353] > > >Hi. > >I am trying to configure two routers as BGP peers . Routers (both) are on >the same LAN but in diffrent subnetworks. I mean, routers can ping >eachother >, since there is another router between them. But , they can not establish >BGP connection as two neighbours. Does that mean they have to be dirctly >connected to eachother.? _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=26464&t=26353 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
