HK, To the best of my knowledge, 25x, 26x, 36x don't have a battery, like in a computer, to keep the clock setting. When you power down the router the time is lost. You could set your routers up to use ntp (network time protocol) and run the ntp server on your computer or something. In my case, I setup one of the main routers to be a master time server, and have all of my routers pull their time from the main router. Then you just have to change the time on one router instead of all. Be aware that the NTP protocol will take some bandwidth, but I don't think it would be much.
Does anybody else have any thoughts? Hope this helps, Scott -----Original Message----- From: hk [mailto:[EMAIL PROTECTED]] Sent: Thursday, November 15, 2001 8:00 PM To: [EMAIL PROTECTED] Subject: help me set clock on router [7:26435] Dear group Psl show me Why is ? When I set clock on rouer 2500 ,2600,3660 serial , but If I reload router . My router not save clock then return *01:41:38.137 UTC Thu Mar 4 1993 Thank Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=26442&t=26435 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
