Ignore this post. I figured it out. For anyone who is interested: http://www.cisco.com/warp/public/556/12.html#2
Thanks -----Original Message----- From: Provost, Robert [mailto:[EMAIL PROTECTED]] Sent: Friday, November 16, 2001 11:27 AM To: [EMAIL PROTECTED] Subject: Nat confusion [7:26484] I am trying to setup NAT translation. here is the setup. I want to NAT any local address, to the IP address of my external ethernet interface (many-to-one). 10.0.0.0 is the internal network. 192.168.1.1 is the IP address of the external ethernet port. I am on the cisco page and I am confused. I have done NAT on 3Com routers, but never on Cisco. Any config help would be appreciated. Thanks, Rob Provost Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=26498&t=26484 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]