As you go through BCARN class. It should be difficult for you. Give you some hint, what you get from show line command
Know how to configure reverse telent. that's it! Thinks carefully, no more clues from me..... Vincent Chong ""Thomas Yi"" Hi. I would like to connect my modem to AUX > port on my 2501 router, so I can connect to my > router through PSTN. Is this possible? BTW I need to do some configuration > on my modem. > how do I access modem through router? > > Is it possible? In my BCRA class, we've used 3640 router. Configured the > ethernet interface and we were able to connect to the modem using the ip > address of ethernet and the port number which was 2033. The modem was > connected to s1/0 on the slot 1. BTW y is it that when I used the ip > address and the port number of the modem 2033, I was not able to telnet to > the mode? even through the modem was physically attached to that serial > interface? > instead we used the ehternet int ip address. > > Then do I have to configure my E0 interface to access modem that is > physically attached to AUX port? If so with what port number? If not, how > do I do it. > > TIA Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=26590&t=26589 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
