Thanks guys, Where would I check / lock the modem DTE speed? all i see is the jumper for "normal" and "override"
I am dialing into the AUX port which leads me to the Hardware=flow control when I do a show line i see that the Line is 9600 which is = to the config I have made on my modem. I do agree and believe that it is a speed mismatch somewhere but i'm not sure where as all seems to be configured right. Just trying to get as much info as possible let me know if you have any other ideas. ThanksMADMAN wrote: > > Most common problem is not locking the modem DTE speed. For > some > stupid reason there is an option, often default, to have the > modem DTE > speed follow the connect speed. > > dave > > 416South wrote: > > > > I'm able to get this modem to dial into the router just fine. > Problem is > > still driving me nuts is that all the characters are showing > up as garbage > > ( x ~ have tryed with > > other programs as well. Has anyone been successful with > dialing into > > routers that may have had the same problems? > > I'm using a USR modem set at > > 9600 baud > > flow control hardware > > Emulation is VT100 > > > > Thanks > -- > David Madland > Sr. Network Engineer > CCIE# 2016 > Qwest Communications Int. Inc. > [EMAIL PROTECTED] > 612-664-3367 > > "Emotion should reflect reason not guide it" > > Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=26709&t=26287 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
