I think I was not able to explain what i want do. I want to configure my 1003 Cisco Router so that if it fails to connect to one access server it should automatically switch to another access router somewhere else. It's simple to backup a serial connection. You configure your in your serial interface a backup dialer interface for example. But you cannot do the same in your bri interface.
Thanks for your help. -----Urspr|ngliche Nachricht----- Von: MADMAN [mailto:[EMAIL PROTECTED]] Gesendet am: Montag, 19. November 2001 17:08 An: Oeztuerk Kerem Cc: [EMAIL PROTECTED] Betreff: Re: Backing up ISDN lines [7:26683] Yes this can certainly be done, you may find an eample here: http://www.cisco.com/warp/public/793/access_dial/index.html Dave Oeztuerk Kerem wrote: > > Hi, > > Does anyone know how to back-up an ISDN Line or is it theoritically > possible? > > What I want to do is : If one Access Server is not available the Cisco 1003 > ISDN router should dial another Access Server. > > Thanks in advance. > > M. Kerem Vzt|rk > Netzwerk Management > Tel : 089 / 2395 1191 > Bankhaus Reuschel & Co. -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=26820&t=26683 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
