So can a Cat switch with a token-ring module. But somehow I don't think that is what the poster wanted to know.
""NP-BASS LEON"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > The MADGE switch will allow it to take place on the LAN side so you don't > have to worry about using your router to filter the traffic. > > -----Original Message----- > From: Mark Odette II [mailto:[EMAIL PROTECTED]] > Sent: Tuesday, November 20, 2001 5:53 PM > To: [EMAIL PROTECTED] > Subject: RE: token ring to eth [7:26828] > > > Right! Which is what I was saying in my last post... The original poster > would either have to plug the TR interface on the Router into a TR interface > on a Switch that also has Ethernet Capabilities, and configure SRB, SRT, > etc., or connect the TR Router to another TR/Ethernet router and let that > router do the translation/media conversion. > > Mark Odette II > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Michael Williams > Sent: Tuesday, November 20, 2001 4:07 PM > To: [EMAIL PROTECTED] > Subject: Re: token ring to eth [7:26828] > > > Darren Crawford wrote: > > Good point.... didn't even think about that. Same argument still applies. > It seems that he's got an ethernet network/connection that he wants to hook > to the TR interface on the router. Either way, a simple connector/adapter > isn't going to work, as they are totally difference methods of media access. > > Mike W. > > > > > What exactly are you trying to accomplish here? The 2502 only > > has one > > token ring and two serial interfaces. If you had a 2513, the > > router > > itself would be your 'media converter' between TR and Ethernet > > segments. > > To my knowledge, there is no such animal to change your token > > ring > > interface into an ethernet interface. > > > > Darren Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=27003&t=26828 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]