Sorry for late reply. My Linux gone down in the previous two days so I am disconnected from mail. The token ring display in my box is the actual one. After re-plugging my token ring and removing my sound card I'm back with the token ring lan. However, I do have connected with the old config but with the MTU displayed as 1500, while all the router interfaces use 4464. Does this matter in the ping action? As I know, the MTU setting will only be matter in segmentation. Does I miss something?
Regards, Fanglo On Fri, 23 Nov 2001, Ken Diliberto wrote: > Hello, Fanglo. > > Are there only two devices on the Token Ring? If not, does anything else work? > > What does the ARP table on the router and the Linux box look like? > > What do the interface parameters on the Linux box look like (ifconfig -a)? > > What does show interface tr0 show on the router? > > Ken > > >>> "Fanglo MA" 11/23/01 02:37AM >>> > Hi ALL, > > I have been trapped by a Tokenring problem and seek for anyone > suggestions. I have token ring router and a Linux connected with a HP TR > Hub. From the indicator on the TR Hub I have told the connection and ring > insertion is ok. However, I can't ping from Linux box to the router. My > router does not have problem to ping to another 2502. All interfaces and > NIC are in same network/mask. From the router I obtain the mac address > correctly by sh arp except we can't ping !!! > > Any idea? > > Regards, > Fanglo Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=27310&t=27177 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
