What version of the IOS are you running? Some of the 12.0 versions have a cosmetic bug which shows an invalid SPID when actually, all is well.
-----Original Message----- From: Pierre-Alex J. Guanel [mailto:[EMAIL PROTECTED]] Sent: Monday, November 26, 2001 1:02 PM To: [EMAIL PROTECTED] Subject: Slimline 2 [7:27365] I am using the Slimline 2 ISDN simulator from PDS technologies. I cannot get the SPID to be accepted. (See below) ISDN BRI0 interface dsl 0, interface ISDN Switchtype = basic-5ess Layer 1 Status: ACTIVE Layer 2 Status: TEI = 64, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHE TEI 64, ces = 1, state = 4(await init) spid1 configured, no LDN, spid1 sent, spid1 NOT valid I have not modifed the default phone numbers 1111 and 2222 configured on Slimline Below are my configs for bri0 interface BRI0 ip address 10.0.0.1 255.255.255.0 encapsulation ppp no ip route-cache no ip mroute-cache dialer map ip 10.0.0.2 1111 dialer-group 1 isdn switch-type basic-5ess isdn spid1 2222 Is there a default LDN number I have to configure? Pierre-Alex Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=27366&t=27365 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
