You need to purchase an additional NIC to have a DMZ. It comes standard with two interfaces, as you stated. ccie1ab
-----Original Message----- From: Alex Lee [mailto:[EMAIL PROTECTED]] Sent: Wednesday, November 21, 2001 12:01 PM To: [EMAIL PROTECTED] Subject: Re: PIX 501 [7:27002] I followed the link. The data sheet says : Quote Interfaces Console Port: RS-232 (RJ-45) 9600 baud Outside: Integrated 10BaseT port, half-duplex, RJ45 Inside: Integrated auto-sensing, auto-MDIX 4-port 10/100 switch, RJ45 Unquote The way I interpret this is that this PIX basically has two interfaces :- one outside (10BaseT port) and one inside but implemented as 4-port switch, which means you can only have two segments and no DMZ. Please correct me if I am wrong. ""Ole Drews Jensen"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > If you look here (watch for wordwrap) > > http://www.cisco.com/warp/public/cc/pd/fw/sqfw500/prodlit/px501_ds.htm > > You will see that it has 4 x 10/100 Mbps ethernet interfaces. > > This could be a newer model, but this one with 10 users and 3DES encryption > license, can be bought from new for $495.- > > Hth, > > Ole > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > Ole Drews Jensen > Systems Network Manager > CCNP, MCSE, MCP+I > RWR Enterprises, Inc. > [EMAIL PROTECTED] > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > http://www.RouterChief.com > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > NEED A JOB ??? > http://www.oledrews.com/job > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > > -----Original Message----- > From: David Tran [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, November 21, 2001 9:38 AM > To: [EMAIL PROTECTED] > Subject: Re: PIX 501 [7:27002] > > > My take on the PIX501 is that it is similar to Cisco router 2501 in that the > hardware is > FIXED. It only has two interfaces. If you want to add another segment to > your network > (i.e. DMZ) then you have no choice but to upgrade to either a 515 or higher. > Other than > that, the PIX IOS code is the same through out the PIX Series (with the > exception that for > the 501 and 506 you don't have redundancy (fail-over support). > > ----- Original Message ----- > From: "Alex Lee" > To: > Sent: Wednesday, November 21, 2001 9:57 AM > Subject: Re: PIX 501 [7:27002] > > > > Has anyone used this PIX yet ? > > > > There were some discussions about this topic 2 weeks(?) ago but none of > the > > participants to the discussion has had any actual hand-on experience with > > the PIX 501 at that time. > > > > I got a quote from our supplier for a new PIX DES bundle with 10 user > > licence for less than $500.00. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=27383&t=27002 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
